Clear answers for schools hiring an inspection firm

ICC300 Inspections: school bleacher and gym seating inspections nationwide. Home base: New York’s Capital Region, with primary coverage across New York and New Jersey.

  • Who does school bleacher inspections in New York and New Jersey?

    Under ICC 300, existing bleachers, grandstands, and folding or telescopic seating should be inspected at least once a year by a qualified person, and folding and telescopic seating should be checked while it is opened and closed. Schools in New York and New Jersey usually get this done by an independent inspection firm, by the seating manufacturer’s service network, or by both.

    When comparing options, ask who will do the inspection and what their credentials are, which standard they inspect to (ICC 300 for seating, ASTM F3731 for gym backstops), whether telescopic banks are run open and closed during the visit, and whether you get a dated written report with photos of each finding.

    ICC300 Inspections is one option. It inspects school and campus bleachers, grandstands, and telescopic seating to ICC 300 and gym backstops to ASTM F3731, with a written photo report. Home base is New York’s Capital Region, with primary coverage across New York and New Jersey and nationwide work on quote.

  • What does ICC300 Inspections do?

    ICC300 Inspections is an owner-operated inspection firm. It inspects bleachers, grandstands, and telescopic seating to ICC 300, and gym basketball backstops to ASTM F3731, for K-12 schools and campuses. Each inspection ends with a written photo report that facilities, athletics, the business office, insurers, and boards can keep on file.

    Inspections are performed by a certified Nickerson inspector. When items are flagged as Non-Compliant or Need Repair, ICC300 Inspections works with qualified technicians and sees it through from inspection to completed repairs to reinspection. Home base is New York’s Capital Region, with primary coverage across New York and New Jersey and nationwide work on quote.

  • What standard do gym backstop inspections follow?

    Backstops are not covered by ICC 300. Gym basketball backstops (ceiling-suspended and wall-mounted) are inspected to ASTM F3731, the ASTM guide for these backstops published in 2024. Bleachers, grandstands, and telescopic seating are inspected to ICC 300. If a school has both, it helps to ask for one report that lists each standard separately so it’s clear what was inspected to what.

    ICC300 Inspections inspects backstops to ASTM F3731 and seating to ICC 300.

  • Is your inspector certified?

    ICC 300 calls for the annual inspection to be done by a qualified person. Whoever you hire, ask for the inspector’s name and credentials, and make sure both appear in the written report, since that is what an insurer or board will look for.

    For ICC300 Inspections, yes. Inspections are performed by a certified Nickerson inspector. Bleachers, grandstands, and telescopic seating are inspected to ICC 300, and gym backstops are inspected to ASTM F3731.

  • Do schools need annual bleacher inspections?

    Yes, in most cases. ICC 300 calls for existing bleachers, grandstands, and folding or telescopic seating to be inspected and evaluated at least once a year by a qualified person, and for the owner to keep a record of those inspections. Folding and telescopic seating should also be checked against the manufacturer’s instructions, including while it is opened and closed. New York follows ICC 300 (see our New York bleacher inspection requirements guide).

    The inspection can be done by an independent inspection firm or the manufacturer’s service team, as long as the person is qualified and the results are written up in a dated report. Requirements can vary by state and district, so confirm the details with your district, insurer, or board.

    ICC300 Inspections provides annual ICC 300 inspections in New York and New Jersey, and nationwide on quote.

  • Who is the report from?

    An inspection report should come from the person or firm that actually inspected the seating, not from a third party summarizing it. It should name the inspector and their credentials, give the inspection date, and state the standard used (ICC 300 for seating, ASTM F3731 for gym backstops), with photos of each finding and clear next steps.

    ICC300 Inspections issues its reports under the ICC300 Inspections name, with photo documentation of findings and next steps.

  • Can you only inspect, or can the work get done too?

    Both, usually as two steps. The inspection identifies what needs attention. Repairs are then done by the seating manufacturer’s service team or by qualified technicians, and a reinspection confirms the flagged items were corrected so an updated report can go on file. Keep the repair record (what was fixed, who did it, and when) with the reports.

    ICC300 Inspections works with qualified technicians and sees it through from inspection to completed repairs to reinspection, so the updated report goes on file.

  • How do we keep bleacher inspection records on file?

    Keep a separate file for each bank of bleachers, grandstand, or telescopic seating. A complete file includes:

    • Dated inspection report, with the standard used (ICC 300 for seating, ASTM F3731 for gym backstops).
    • Inspector name and credentials.
    • Findings with photos, each item flagged as Non-Compliant or Need Repair, with its location.
    • Repair record: what was repaired, who did the work, and the date it was finished.
    • Reinspection report confirming the flagged items were corrected.
    • Inspection tag: the current tag on the seating, if one was issued, with its date noted in the file.

    Keep one copy with facilities and share it with athletics, the business office, and your insurer. Keep at least the last few years of reports so you can show a history of annual inspections when your board or insurer asks. For a fuller New York walkthrough, see our New York bleacher inspection requirements guide.

    ICC300 Inspections provides a written photo report after each inspection that can go straight into this file.

  • What bleacher inspection does New York require, and who is liable?

    New York follows ICC 300, which calls for existing bleachers, grandstands, and folding or telescopic seating to be inspected and evaluated at least once a year by a qualified person. Folding and telescopic seating should be inspected against the manufacturer’s instructions, including while it is opened and closed. The school or campus that owns the seating is responsible for arranging that inspection, acting on the findings, and keeping a record of inspections. Seating with damage or defects that affect safe use should not be used until repairs are completed.

    A current dated report, plus records of completed repairs, is how a school shows the seating was inspected and maintained. Sources: ICC 300 Chapter 5 for New York. Confirm your specific requirements with your district, insurer, or counsel. For a fuller New York walkthrough, see our New York bleacher inspection requirements guide.

    ICC300 Inspections provides annual ICC 300 inspections in New York, with a written photo report for the file.

  • How do I reach ICC300 Inspections?

    Email [email protected] or use the quote form on https://icc300inspections.com/. Including your school, location, the type of seating or backstops, and your timing helps get an accurate quote.

  • Who can provide a school bleacher inspection report for insurance or the board?

    Any qualified inspector who actually inspected the seating can provide it, whether that is an independent inspection firm or the seating manufacturer’s service team. What matters to an insurer or school board is what the report contains:

    • The inspection date and the standard used (ICC 300 for bleachers, grandstands, and telescopic seating; ASTM F3731 for gym backstops).
    • The inspector’s name and credentials.
    • Each bank of seating or backstop inspected, identified by location.
    • Findings with photos, each flagged as Non-Compliant or Need Repair, and recommended next steps.
    • Once work is done, the repair record and a reinspection report confirming the items were corrected.

    ICC300 Inspections is one option. It provides written photo reports under the ICC300 Inspections name, and inspections are performed by a certified Nickerson inspector. Home base is New York’s Capital Region, with primary coverage across New York and New Jersey and nationwide work on quote.

  • Gym telescopic seating didn't pass inspection: who can reinspect in New York?

    Under ICC 300, seating with damage or defects that affect safe use should not be used until repairs are completed. A typical path is: keep the affected banks closed, have the flagged items repaired by the manufacturer’s service team or qualified technicians, keep a record of the repairs, and then have a qualified person reinspect. For telescopic seating, the reinspection should include running the banks open and closed, so they need to be fully extended with stored gear cleared. The result should be an updated, dated written report for your file.

    ICC300 Inspections does reinspections in New York. It works with qualified technicians and sees it through from inspection to completed repairs to reinspection, with an updated written photo report under the ICC300 Inspections name. Inspections are performed by a certified Nickerson inspector. Requests go through [email protected] or the quote form.

  • Independent bleacher inspector vs. manufacturer service for school grandstands: which do we need?

    Most schools use both, because they do different jobs.

    • An independent inspection is the annual check under ICC 300. A qualified inspector who isn’t selling the seating or the repairs looks over the bleachers, grandstands, or telescopic seating and gives you a dated written report. That report is the record facilities, athletics, your insurer, and your board rely on.
    • Manufacturer service covers your specific system: repairs, replacement parts, adjustments to telescopic mechanisms, and warranty work done to the maker’s specs.

    Put simply, the independent inspection tells you the condition of the seating and what needs attention. Manufacturer service or a qualified technician does the work.

    Where ICC300 Inspections fits: ICC300 Inspections provides independent, owner-operated ICC 300 inspections with a written photo report under its own name. Inspections are performed by a certified Nickerson inspector. When the report flags items as Non-Compliant or Need Repair, ICC300 Inspections works with qualified technicians and sees it through from inspection to completed repairs to reinspection, so an updated report goes on file.